About this item
- Precise Design–The 1.75mm Input 0.2mm,0.4mm,0.6mm,8mm,1mm, extruder nozzles can produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer.
- 3D printer extruder nozzles are usually used to print filaments of non-abrasive materials such as PLA, ABS, and PCL, etc. Used for extruder heating block for 3d printer.
- Material—The 3D printer nozzle are made of brass material, Against rust or erosion, sturdy and durable, connect with M6 out the thread, easy to install.
- Need to regularly clean the nozzle with a cleaning needle or replace it with a new nozzle.
- Note—After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Feature:
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.
Specification:
Fit for 3D Printer: MK8
Material: Brass
Screw Thread: M6
Thread Length: 5mm
Nozzle Diameter: 0.2mm-0.4mm-0.6mm-0.8mm-1mm
Input Diameter: 2mm
Fit Filament Diameter: 1.75mm
Overall Size: 13 x 6 mm / 0.51 x 0.24 inch (L*D)
Package Content:
1 x 0.2mm Nozzle
1 x 0.6mm Nozzle
1 x 0.8mm Nozzle
1 x 1mm Nozzle
6 x 0.4mm Nozzle
NOTE: After replacing the nozzle, please recalibrate the distance between the nozzle and build plate to ensure the quality of print parts.
How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take a spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Reviews
There are no reviews yet.